All modules are produced with the same build- and sound quality as the S1 MK2. The format of modules is standardized for Eurorack and to the recognized standard for modular systems on the market. The philosophy behind our products is to offer ergonomic and dispositional modules; all functions as knobs and switches are arranged above patch points. This means that all connecting patch cables are away from knobs and switches.
The electronics behind the panel is assembled with the latest technology using surface mounted devices which make it possible to "squeeze" advanced electronics on the small surface. The printed circuits is attached directly to the front panels by vertical standing potentiometers and patch sockets and with no connecting wires. Electronics behind the front panel is only 20mm deep. The front panel is made of a 1.5mm stainless steal, good visible legending and painted with coat powder.
The power connector is a standard five pins in two rows and pin-out is the common:
+12Volts, gnd, gnd, gnd, -12Volts (upper pins are +12Volts connector). All modules are fully protected against wrong polarity.
3 August, 2009