The NS-4 is a true analogue noise generator
with four oise/random signal outputs;
Sample and Hold (S/H), White, Pink and
Red.
S/H
The S/H generates a random signal
controlled by two voltage controlled parameters; RATE and LAG (slew rate).
The RATE controls the period for every sample point from 10 seconds (0.1 Hz)
to 2 millisecond (500Hz).
The LAG controls the slew rate of the incoming S/H
signal from 0.1 Hz to 1000 Hz.
The outgoing signal is, in other words,
filtered by a voltage controlled low pass filter with 12 dB/octave slope.
The S/H RATE and the S/H LAG can be controlled manually by knobs and by
external signals (RATE CV and LAG CV). Rate generator can be sync-ed by an
external signal and with any shape (S/H TRIG input).
The S/H can be also used
for an external signal (EXT S/H) and the level of incomming signal is controlled
manually (EXT S/H LEVEL).
WHITE noise
white
noise is a full audio bandwidth noise generator.
PINK noise
pink noise is a filtered white noise
generator by 3dB/octave across the whole audio frequency range.
RED noise
red noise is hard filtered and contains
essentially only frequencies up to 200 Hz.
